VdS Schadenverhuetung Zertifikate

Certificate

S411022


"Minifog PressProtect"
Low pressure water mist system

Telefon

Minimax Technologies GmbH


Industriestraße 10/12
DE 23840 Bad Oldesloe
Telefon +49 4531 803-0
Email webmaster@minimax.de

vds
VdS 2344:2022-10 - Procedure guidelines
VdS 2562:2013-03 - Procedure for the approval of new extinguishing technologies

Com­po­nents for water ex­tin­gui­shing systems
Related Products

The fine spray fire extinguishing system 'Minifog PressProtect' may be used only for the protection of presses and machines where

  • combustible liquids with a flash point = +55°C
  • splints, wood fibres or substances less hazardous as to their combustibility and fire
    behaviour
    do appear.

    Fields of application of the system are, among others:
  • presses to produce wood panels, press cellars and thermo oil ducts
  • gas and steam turbines
  • coating units
  • generators
  • emergency units
  • hydraulic units

    It has to be avoided an uncontrolled fire spread (e.g. spray fire) by following measures:
  • immediate interruption of the supply of means of production, lubricants, heat transfer oil
    etc.
  • deactivation of exhaust equipment, fans, ventilators and heaters.

    The standard interface (extinguishment) can be omitted if the fire detection and fire alarm system has been equipped with control and indicating equipment of Minimax GmbH & Co. KG, Type FMZ 5000 (VdS Approval G 204124) and the fire detection and fire alarm system and the fire extinguishing system are installed by Minimax GmbH & Co. KG.

    As strainer according to G4070049 the design with a mesh size of 2.5 mm or 1,0 mm are only allowable.

    The system manual of the manufacturer (see enclosure 2) has to be observed.

Updated at: 18.08.2026
    . up
    Top